日本語 (JA)

Explore the features that offer safe, fast, and efficient solid-liquid separation and drying performance 

Accelerated drying

We offer a unique filter dryer in all glass design to speed up the drying of the product. The filter dryer has a heating disc sandwiched in the filtration unit, and can be supplied with the same thermal fluid source as the jacket to provide a uniform thermal condition from the bottom and sides of the vessel.

Safe, fast and effective filtration and drying

Sealed for up to 2 bar pressure usage

The vessel, filter, lid, and components are all designed to withstand pressures of up to 2 barG. The sitter seal is specifically designed for this pressure range, and prevents pressure leakage during stirring operation.

Safe, fast and effective pressurised filtration

AGI Glassplant Benchtop Nutche Filter Details

All round protection

AGI Filter Dryer has safety features that protect the user and the vessel in the event of unforeseen pressure shoot up. The pressure relief valve is calibrated to release excess pressure beyond 2 barG, and the clear polycarbonate protective shield covers the entire vessel area and is easily removable for filter access.

Safety for users and the equipment

Process visibility while being protected

Polycarbonate protective shield around the filter unit

Multipurpose stirrer blade

The filtration stirrer blade helps to mix the slurry during the mixing phase, and smoothens the product cake (in a clockwise rotation) so that the washing medium passes through it uniformly, ensuring thorough washing. After washing, the filtration stirrer blade helps to break apart (in a counter-clockwise rotation) the product cake for easy drying.

AGI Filtration blade

Filtration blade for stirring, smoothening and breaking cake

Effective filtration

Our filtration part is meticulously designed to perform washing and filtration effectively. The gasket with O-ring forms a perfect seal between the glass and the PTFE plate.

No leaks or bypass around the filter membrane

Note: Since the pore size of filter membranes are variable, they are not included in standard package.

AGI Filter cloths and unit configuration

Convenient quick-release couplings

The thermal jacket is connected to the thermostat tubings via quick-release couplings. At the end of the process, the tubings can be quickly removed and the vessel can be rotated for easy product collection. The couplings also have pressure safety valves that protect the glass vessel in case of over-pressure in the thermal jacket.

Mess-free work space

Convenience for product collection

Easy end product collection

Vessels can be rotated 360° in the stand using the vessel swing/rotation mechanism. This is a useful feature, especially if the end product volume is large and the filter can't be opened without spilling. The lid can be removed and the vessel can be pushed out, rotated, and secured at any desired angle.

Safe and easy recovery of the end product

Not available for 3 L and 5 L Double wall Vessels

AGI Nutche Reactor Product Collection

Easy access to product for collection

Full jacket design for high thermal performance

A full jacket design means that the thermal jacket fully covers the process vessel, which offers maximised thermal transfer to the process. The filter and flush valve are designed to provide very minimal dead space.

High performing vessel

Filter with low dead volume

AGI Nutche Filter Full jacket design

Standard package

  1. Glass Body (Double Wall),
    DN 100 (1 L, 2 L) / DN 150 (3 L, 5 L)

  2. Stopper for Additional Hole, SQG 24/40

  3. Stopper for Hand Hole, SQG 29/42

  4. Safety Valve

  5. Glass Cover, DN 100 (1 L, 2 L) / DN 150 (3 L, 5 L),
    6 Ports (SQG 29/42 x2, SQG 24/40 x4)

  6. Filtration Part, PTFE

  7. O-ring, FKM

  8. PTFE Stirrer Shaft, Shaft OD: 10 mm

  9. Temperature Sensor Probe, OD: 8 mm, L: 660 mm

  10. Compound Pressure Gauge

  11. PTFE Stirrer Guide, Glass Ball Bearing, SQG 29/42, Shaft OD: 10 mm

  12. Support Structure

  13. Tilting Clamp

  14. Shaft Holder

  15. Metal Adapter for HTF, screw coupling, M16

  16. Metal Adapter for HTF, screw coupling, M16

  17. Protective Shield

  18. Lab Jack

  19. Quick Release Clamp, DN 100 (1 L, 2 L) / DN 150 (3 L, 5 L)

  20. Coupler M16

  21. Coupler M16 with safety valve

* All O-rings are consumable parts
**Overhead stirrer motor is not included

AGI Benchtop Nutsche Filter Specifications

Something else in mind?

At AGI, we can help to find the best solution for you. If you have additional requirements or a design already in mind, feel free to send us a message and/or drawing so that we can understand your process better and provide you with a customised product that meets your exact needs.